A bathroom pull dimmer switch suitable for use with both standard mains voltage and low voltage lighting. Supplied complete with both white and chrome covers, cord with white and chrome toggles. Switching sequence as follows:
To switch on: Pull cord once and release
To switch off: Pull cord once and release
To dim lighting: Pull cord and hold until required light level is acheived then release
Specification:
- Mains voltage maximum load 250w. Minimum load 50w
- Low voltage maximum load 175w. Minimum load 50w (always use good quality electronic tansformers)
- Not suitable for use with wirewound transformers or fluorescent lighting including low energy bulbs
- Please note that due to the safety circuitry built into this dimmer the full brightness of the lamps used will be 80% of their optimum brightness (ie If 100w bulb is used max brightness with dimmer on maximum will be 80w)
Dimensions:
